Assembly / Installation

1. Paste the mounting template that was sent in the package to the surface where the air conditioner will be installed.

2. Cut the window that shown in the template with a hand tool like jigsaw. and drill holes that shown on template.

3. Place the Air Conditioner on the surface that has holes and Fix the air conditioner to the panel surface from the drilled holes by the M8 screws and tighten the screws.

4. 3X1mm. Energize the cable shown in the illustration.

5. The device will start working with set to 34 °C. To change the set value and other parameters, look at user guide.

6.Tighten the brass outlet nipple which is already provided with the unit, onto the drainage outlet located at the bottom of the air conditioner. (If required, connect a drainage hose to the end of the nipple. Hose diameter should be 3/8'' inches)